Installation Engineering & Operational Support

Bluestream – Wells Decommissioning (2022) Project Engineering

Providing project engineering support on the procedures development, P&ID and deck layout drafting, and mob/demob plans; as well as offshore project engineering during operations.

Learn More

DEME – Kaskasi (2022) Project Engineering

Providing project engineering assistance for 2 scopes at Kaskasi Wind Farm: monopile installation and TP installation.

Learn More

Bluestream – Various ROV & RA Projects (2022) Project Engineer

Assistance with the preparation of documents and datasheets for Rope Access & ROV projects in both Oil&Gas and wind industries. Most of them take place in the UK, German or Danish waters.

Learn More

Seaway7 - Hollandse Kust Zuid (2022) Field Engineer for Monopile installation

Field engineer tasks including assist during loadout; check pile hole/gripper arm clashes; log rigging usage; prepare navigation lights; distribute as-built documentation; design solutions to improve operation.

Learn More

Jan de Nul – Greenlink/Formosa 2 (2022) Project Engineering

Project Engineering Various Projects, including average fuel consumption and preparing repair scope in Greater Changhua OWF. Lastly, vessel based work including MDR's; Client and MWS interface; Ensure QA/QC standards are met; MOCs development; Crew changes planning and logistics.

Learn More

N-Sea – (2022)

Cable repair and installation analysis

Learn More

Seaway 7 – Formosa 2 OWF (2022)

Project/Field Engineer(s) providing engineering support both offshore and on board Heavy Lift Vessel.

Learn More

DCN - 50hertz (2022) Project Engineer for Fiberoptic Cable Repair

The work consisted of project preparations such as work procedures; supporting drawings; project engineering for Fiberoptic Cable Repair.

Learn More

DEME Offshore – Kaskasi OWF (2022) Inter Array Cable Installation Analysis

DEME Offshore contracted ARC to provide the following: - Freelay analysis - A&R analysis - Survival analysis - 1st end pull-in analysis - 2nd end pull-in analysis - Reporting

Learn More

DEME Offshore – Munmu Baran (2022)

The MunmuBaram Floating Wind Turbine Installation Analysis in OrcaFlex.

Learn More

N-Sea – (2022)

Lead Orcaflex Engineer providing assistance for the cable repair and installation analysis.

Learn More

Boskalis – Dolwin 6 & Ostwind 2 (2022) Project/Field Engineer o/b cable jointing vessel

Jointing the nearshore and offshore export cable sections of Dolwin 6 & Ostwind 2 OWFs.

Learn More

Seaway 7 – Hollandse Kust Zuid (2022) Project Representative

Project representative at SIF yard for the load out of monopiles / secondary structure.

Learn More

DEME Offshore – St. Nazaire (2022) Project & Field Engineering Support

DEME has contracted ARC to provide project and field engineering support on the T&I secondary works. The following specific activities are to be overviewed and planned as part of the SOW at every installation location

Learn More

Bluestream – Petrogas HELM decommissioning (2021) Decommissioning Support

The ARC Engineers supported the various decommissioning projects, where required (e.g. Helm, Haven, Hoorn) by preparing documentation, reviewing engineering and vendor documentation, defining scopes of work, etc.

Learn More

Boskalis – Kakinada (2021) Project Engineering Support

The scope of work envisaged for ARC-SES was as follows: - Development and writing the project’s Installation Manual - Mobilisation and Offshore Support

Learn More

Boskalis Subsea Cables – Sandbank & Hornsrev 3 (HR3) Offshore Wind Farms – Engineering support (office & offshore) CPS stabilization via rock bag installation

Boskalis was awarded the stabilisation of the Cable Protection System (CPS) installed on the infield cables exiting the monopiles of the Sandbank & Hornsrev 3 (HR3) Offshore Wind Farms.

Learn More

N-SEA SURVEY – VARIOUS PROJECTS (2021) GIS COORDINATOR

OI was requested to provide GIS coordination services

Learn More

Seaway 7 – Formosa 2 OWF (2020)

OI provided Seaway 7 with offshore engineering support during the pin pile installation phase.

Learn More

Jan de Nul - Cable repeair procedures (2019)

The development of cable repair procedures and repair concepts, supported by associated risk assessments, as part of Tennet’s emergency plan for the fastest possible restoration of unimpeded cable connections of their submarine cable system.

Learn More

SPT - Engineering Support for FPSO Mooring Project (2019)

SPT requested ARC to support them with the engineering work for the general structural design of the suction anchor pile.

Learn More

N-Sea - Subsea Clamp Installation (2019)

N-Sea approached ARC with a request to support them with drafting for several disciplines.

Learn More

Boskalis/VBMS - Hohe See Engineering Support (2018)

ARC-ses was contracted by Boskalis/VBMS to assist with creating installation procedures for the cable laying, cable pull-in and cable burial operations.

Learn More

VBMS - Borssele Bete Engineering and Installation Support

Boskalis has contracted ARC to perform the following Engineering and Installation support

Learn More

Tideway - Seamade - Works Manager + Lead Engineer

Tideway has contracted ARC to provide a Works Manager for the export cable installation and a Lead Engineer

Learn More

Boskalis - Engineering Support Inch Cape

ARC-ses assists with generating deliverables for the Early Engineering works and interface with employer's subcontractors to provide cable installation feedback on the design process.

Learn More

Tideway - Support Documentation Livingstone

ARC-ses assists with gaining overview of required documentation and status thereof.

Learn More

VBMS - Borselle (2017)

VBMS has contracted ARC to perform the following: Route Engineering, Survey, Positioning and as-built procedures, OoS Cable Removal Risk Assessment and Procedures, Pre Lay Grapnel Run (PLGR) Risk Assessment and Procedures, Platform Pull-in Procedures and Cable Lay Procedures.

Learn More

VBMS – Arkona Windfarm (2017)

VBMS has contracted ARC to perform the following Design and Engineering support for a T-Rex boulder clearance tool; Tool Mobilization, Launch, Normal operations, Recovery and Maintenance procedures and operational support assigning a Field Engineer for the boulder clearance execution phase.

Learn More
DCIM100MEDIADJI_0324.JPG

VBMS - Hohe See - Installation Support (2017)

VBMS has contracted ARC to perform the following Engineering and Installation support: Infield Cables Lay & Pull-in procedures, Infield Cables Pull-in procedures, Pre Lay Grapnel Run (PLGR) & Out of Service (OoS) cable removal procedures and Infield Cables Pull-in procedures.

Learn More

Tideway (2017)

Tideway has contracted ARC to perform the following Engineering and Installation support: Platform pull-in analyses and procedures, Cable lay analysis and procedures, Joint overboarding analyses, Cable Load-out analyses and additional support.

Learn More

Tideway (2017)

Tideway has contracted ARC to perform the following Engineering and Installation support: Monopile and OSS pull-in analysis and procedures, Cable burial sequence, Cable loading/transportation/loadout procedures, Cable Lay analysis and procedures, CIV mobilization plans and Drafting support.

Learn More

Tideway Installation Support for Rentel (2017)

Tideway has contracted ARC to perform the following Engineering and Installation support: Normal lay analyses, OSS and WTG pull-in analysis and procedures, Load-out analyses and drafting support.

Learn More

VBMS (2016)

VBMS has contracted ARC to perform the following Engineering and Installation support: Pull-in, cable lay, abandonment and recovery procedures.

Learn More

VBMS Dudgeon (2016)

VBMS has contracted ARC to perform the following procedures: Route Engineering, PLGR and Disposal, Vessel Loading & Transportation, Lay & Pull-in, Cable Recovery and Repair and Weather Assessment

Learn More

WPD (2015)

The Nordergründe wind park s situated in the mouth of the Weser and Jade estuary, which is a highly morphodynamic area. A survey performed in 2014 shows that the seabed level in the area of the wind farm varies between 2 and 11 meters below LAT. The design life of the wind farm is anticipated to be 25 years. ARC supported ....

Learn More

Gemini OWF (2015)

ARC was requested to write a Method Statement for Cable Burial with a MFE Tool (Mass Flow Excavator), with special attention to: Risk Assessment, Risk Assessment, ...

Learn More

Volker Wessels Boskalis (2013)

ARC supported Volker Wessels with Drafting package, cables installation analyses, and installation engineering of packages for Buitendieck, Westermost rough export cable and Nordsee Ost infield cables, ...

Learn More

Visser & Smit Marine Contractors (2013)

VSMC contracted ARC to make a conceptual design of the cable pull-in frame, which will be used for the infield cable pull-ins at the offshore substation. The designed frame comprises 3 sections connected by bolted flange connections. ...

Learn More

Visser & Smit Marine Contractors (2013)

ARC provided project engineering services, including method statements and procedures, as well as the review and guidance of VSMC assisting divisions. ...

Learn More

Offshore Windforce (2014)

Offshore Windforce VOF has been contracted by Dong Energy to transport and install 108 monopiles in the Irish Sea for West of Duddon Sands project. ARC supported OWF with drafting support for installation procedures of monopiles and transition pieces; Operations Management f free issued installation vessels, Sea Installer and Pacific Orca; ...

Learn More

Canyon (2013)

Canyon Offshore Ltd, a Helix Energy Solutions Company, has been invited to tender for the installation and trenching of the Borwin-1 HVAC cable, as part of Transpower’s Bard offshore wind farm, in Germany. ARC compile the HVAC cable installation method statements and ...

Learn More

Contact us

Noordsingel 117, 3035 EM Rotterdam, The Netherlands
+31(0) 10 737 09 38